Systemair SAVE VTR 300 (older model till 2020) filter sets – original & compatible F7/G3 filters (art. 25314)
In this category you will find both original and high‑quality compatible filter sets for the
Systemair SAVE VTR 300 ventilation unit (older model produced until 2020).
The original filter set BF VTR 300 B STD kit has the article number
25314 and consists of:
-
F7 / ePM2,5 70% – supply air filter (outdoor air),
size 139 × 387 × 470 mm, 1 pocket
(included in original filter kit 25314)
-
G3 / Coarse 50% – exhaust / extract air filter,
size 134 × 387 × 275 mm, 1 pocket
(included in original filter kit 25314)
Important: all filter dimensions are given without gasket.
However, all filters are supplied with gasket (or sealing edge) for tight and secure installation.
Original individual filters for the SAVE VTR 300 older model are available as part of filter kit
25314 (original replacement filters F7 + G3).
All compatible filter sets are manufactured according to the original dimensions and filter classes.
They fit perfectly into the filter frames of the SAVE VTR 300 older model ventilation units
(unit art. no.: 19592, 19593, 78979, 78969, 88300, 88301) and ensure:
- very good indoor air quality
- stable and quiet operation of the unit
- energy‑efficient performance and longer service life of fans and heat exchanger
You can choose between standard compatible, original, premium (NanoWave) and
carbon filter sets depending on your needs and air quality requirements.
Available Systemair SAVE VTR 300 (older model) filter sets
-
Standard compatible F7 + G3 set – best value for money
-
Original Systemair F7 + G3 set – art. 25314 (BF VTR 300 B STD kit)
-
Premium NanoWave filter set – maximum efficiency & low energy consumption
-
Carbon filter set – for odour and VOC reduction
Why choose the original filter set 25314 (BF VTR 300 B STD kit)?
The original Systemair BF VTR 300 B STD kit, article number 25314, is designed
specifically for the SAVE VTR 300 older model units (art. no. 19592, 19593, 78979, 78969, 88300, 88301)
and uses filter media that meet Systemair’s technical requirements. This ensures:
- certified filtration efficiency according to ISO 16890
- optimal pressure drop – balanced airflow and low energy consumption
- full compatibility with the unit’s filter frames and sealing surfaces
Filter classes and dimensions for Systemair SAVE VTR 300 (older model)
The standard configuration for the SAVE VTR 300 older model uses the following filter classes and sizes
(all dimensions are given without gasket, filters are supplied with gasket):
-
F7 / ePM2,5 70% – supply air (outdoor air) filter
Size: 139 × 387 × 470 mm, 1 pocket
Included in original filter kit: 25314
-
G3 / Coarse 50% – exhaust / extract air filter
Size: 134 × 387 × 275 mm, 1 pocket
Included in original filter kit: 25314
This combination offers a very good balance between fine particle filtration
(pollen, fine dust, allergens) on the supply side and robust pre‑filtration on the
exhaust side for energy‑efficient operation.
Premium NanoWave filter set – for maximum performance
The NanoWave premium filter set for the SAVE VTR 300 older model is manufactured from
advanced NanoWave filter media. Compared to conventional synthetic filters, NanoWave provides:
- higher effective filter surface area
- improved dust holding capacity
- lower initial and average pressure drop
This means better filtration efficiency and lower energy consumption
over the entire service life of the filter. It is an excellent choice for users who want
maximum performance from their Systemair SAVE VTR 300 ventilation unit.
Carbon filter set – for odours and VOC reduction
The carbon filter set for the Systemair SAVE VTR 300 older model contains
activated carbon, which helps to reduce:
- odours from traffic, cooking, smoking or industry
- volatile organic compounds (VOCs)
This set is especially recommended for homes in high‑traffic areas,
near industrial zones or where odour control is important.
How often should SAVE VTR 300 (older model) filters be replaced?
Recommended replacement interval for Systemair SAVE VTR 300 older model units:
- 1–2 times per year in standard residential use
- more frequently if:
- you live in a high‑traffic or industrial area
- there are construction works nearby
- there is a lot of dust, pollen or pets in the home
Filters should be replaced earlier if they are visibly dirty or if the unit indicates a
filter/maintenance alarm. A clogged filter increases pressure drop, reduces airflow
and raises energy consumption.
Filter installation in Systemair SAVE VTR 300 (older model)
When replacing filters:
- switch off the unit before opening the service door
- remove the old filters carefully to avoid dust spreading inside the unit
- check the airflow direction arrows on the filters and install them accordingly
- make sure the filters fit tightly and there are no gaps for air bypass
For detailed instructions, always refer to the official
Systemair SAVE VTR 300 user manual for your specific older model.
Original vs compatible filters – what is the difference?
-
Original filters (set art. 25314) –
approved by Systemair, fully in line with the manufacturer’s technical specifications and
tested for the SAVE VTR 300 older model units (art. no. 19592, 19593, 78979, 78969, 88300, 88301).
-
Compatible filters –
manufactured with the same dimensions and filter classes as the originals. They fit into the
same filter frames and offer comparable filtration performance, often at a more affordable price.
-
Premium NanoWave filters –
upgraded compatible filters with advanced media for maximum efficiency and minimum energy usage.
-
Carbon filters –
compatible filters with an activated carbon layer for odour and VOC reduction.
FAQ – Systemair SAVE VTR 300 (older model) filters
Which filter set should I choose for my Systemair SAVE VTR 300 (older model)?
Are compatible filters safe to use in Systemair SAVE VTR 300 (older model) units?
Yes, compatible filters in this category are manufactured to match the dimensions and
filter classes of the original filters. When installed correctly, they provide reliable
filtration and safe operation of the unit.
How do I know if the filters fit my unit?
Check the exact unit model (Systemair SAVE VTR 300 older model) and the
article number on the nameplate. These filter sets are intended for units with art. no.:
19592, 19593, 78979, 78969, 88300, 88301.
Compare the filter dimensions and classes with the product description
(all dimensions are given without gasket, filters are supplied with gasket):
- F7 / ePM2,5 70%, 139 × 387 × 470 mm, 1 pocket
- G3 / Coarse 50%, 134 × 387 × 275 mm, 1 pocket
If in doubt, contact customer support and provide your unit model, article number and, if possible,
a photo of the existing filters.
What happens if I use the wrong filter size or class?
- air may bypass the filter, reducing indoor air quality
- pressure drop may be too high, causing increased energy consumption
- the unit may not reach the designed airflow and comfort level
For optimal performance, always use correctly sized filters with appropriate filter classes designed for the
Systemair SAVE VTR 300 older model.
SYSTEMAIR SAVE VTR 300/B art.nr. 25314 original filterset (older model)€31.90 €25.73 As low as €29.00 €23.39In stock
Read more »