SAVE VSR 700
Systemair SAVE VSR 700 filter kits – original and compatible F7/M5 compact filters (filter kit 454339)
In this category you will find both original and high-quality compatible filter kits for the Systemair SAVE VSR 700 ventilation unit, which uses compact filters with gasket.
The original filter kit for this unit – SAVE VSR 700 PF STD – has article number 454339 and consists of the following filters:
-
F7 / ePM1 60% – supply air (outdoor air) filter,
size 606 × 284 × 96 mm (dimensions with gasket), compact filter, supplied with gasket -
M5 / ePM10 55% – extract air filter,
size 606 × 294 × 96 mm (dimensions with gasket), compact filter, supplied with gasket
Original replacement filters for the SAVE VSR 700 are available as filter kit 454339 (original replacement filters F7 + M5).
All compatible filter kits are manufactured according to the original filter dimensions and filter classes. They fit perfectly into the filter frames of the SAVE VSR 700 unit and ensure:
- very good indoor air quality
- stable and quiet unit operation
- energy-efficient performance and longer service life of fans and heat exchanger
Depending on your needs, you can choose a standard compatible, original or carbon filter kit.
Available Systemair SAVE VSR 700 filter kits
- Standard compatible F7 + M5 filter kit – best price-performance ratio
- Original Systemair F7 + M5 filter kit – art. 454339 (SAVE VSR 700 PF STD)
- Carbon filter kit – for odor and VOC reduction
Which one to choose – original or compatible?
Both the original SAVE VSR 700 PF STD kit (art. 454339) and high-quality compatible filter kits are designed for the SAVE VSR 700 unit.
- Original filter kit – manufactured according to the Systemair factory specifications and tested by the manufacturer.
- Compatible filter kit – produced with the same dimensions and filter classes, fits the same filter frames and offers excellent filtration performance, often at a lower price.
- Carbon filter kit – includes an activated carbon layer to help reduce odors and volatile organic compounds (VOC).
The right choice depends on your preferences, budget and indoor air quality requirements. When installed correctly, all options ensure reliable and energy-efficient operation.
Systemair SAVE VSR 700 filter classes and dimensions
The standard configuration of this unit uses the following filter classes and sizes. The dimensions below are given with gasket – filters are supplied with gasket:
-
F7 / ePM1 60% – supply air compact filter
Size: 606 × 284 × 96 mm (dimensions with gasket) -
M5 / ePM10 55% – extract air compact filter
Size: 606 × 294 × 96 mm (dimensions with gasket)
This combination provides an excellent balance between fine particle filtration (pollen, fine dust, allergens) and low pressure drop, allowing energy-efficient and quiet operation.
Carbon filter kit – for odor and VOC reduction
The carbon filter kit for SAVE VSR 700 contains activated carbon filters that help reduce:
- odors from traffic, cooking, smoking or industry
- volatile organic compounds (VOC)
This kit is especially recommended for homes or commercial buildings located near busy roads or industrial areas, or wherever effective odor control is important.
How often should SAVE VSR 700 filters be replaced?
Recommended replacement interval:
- 1–2 times per year in normal use
- more frequently if:
- you are close to busy traffic or industrial areas
- construction works are nearby
- there is high dust level, pollen or pets indoors
Filters should also be replaced earlier if visibly dirty or if the unit displays a filter/service alarm. A clogged filter increases pressure drop, reduces airflow and raises energy consumption.
Filter installation in Systemair SAVE VSR 700
- switch off the unit before opening the service panel
- remove used filters carefully to prevent dust spreading inside the unit
- check the airflow direction arrows on the filters and install accordingly
- ensure filters fit tightly with no bypass gaps
Always refer to your specific Systemair SAVE VSR 700 user manual for detailed instructions.
Original vs compatible filters – what is the difference?
- Original filters (kit art. 454339) – approved and tested by Systemair according to manufacturer specifications.
- Compatible filters – manufactured with the same dimensions and filter classes as originals, fitting the same filter frames and offering comparable filtration efficiency, often at a lower price.
- Carbon filters – compatible filters with activated carbon layer for odor and VOC reduction.
FAQ – Systemair SAVE VSR 700 filters
Which filter kit should I choose for my SAVE VSR 700?
- For normal use: standard compatible kit (F7 + M5) – Systemair SAVE VSR 700 – standard compatible filter kit
- For maximum compliance with manufacturer specifications: original kit art. 454339 – Systemair SAVE VSR 700 – original filter kit 454339
- For odor and VOC reduction: carbon filter kit – Systemair SAVE VSR 700 – carbon filter kit
Are compatible filters safe to use in SAVE VSR 700?
Yes. The compatible filters in this category are manufactured according to the original filter dimensions and filter classes. When installed correctly, they ensure reliable filtration and safe unit operation.
What happens if I use incorrect size or filter class?
- air may bypass the filter, reducing indoor air quality
- pressure drop may increase, raising energy consumption
- the unit may not reach designed airflow and comfort levels
For best performance, always use filters with the correct dimensions and filter class specifically designed for Systemair SAVE VSR 700.
