Toggle Nav
Search
FLEXIT SPIRIT UNI 2
FLEXIT SPIRIT UNI 2 / UNI 2 AC Filter Sets – Original, High‑Quality Alternative and Carbon
In this category you will find original FLEXIT filter sets as well as carefully selected high‑quality alternative sets and a carbon filter set for the FLEXIT SPIRIT UNI 2 and FLEXIT SPIRIT UNI 2 AC units. All sets are manufactured in the correct size 333 × 113 × 130 mm to ensure:
- very good indoor air quality
- reliable and quiet unit operation
- energy‑efficient performance with low pressure drop
Our alternative (non‑original) filters are produced with the same dimensions and filtration class as the originals and fit precisely into the filter slots of the unit (333 × 113 × 130 mm).
Compatibility
These filter sets are designed specifically for:
- FLEXIT SPIRIT UNI 2
- FLEXIT SPIRIT UNI 2 AC
Do not confuse these units with other FLEXIT SPIRIT or UNI models – filter sizes and sets may differ. Always check the model name on the nameplate and compare the filter dimensions (333 × 113 × 130 mm) before ordering.
Available Filter Sets
1. High‑Quality Alternative F7 / ePM1‑55% Filter Set (Recommended)
A popular and cost‑effective choice that keeps maintenance costs lower while maintaining high air quality.
- Content: 2× F7 / ePM1‑55% alternative filters
- Dimensions: 333 × 113 × 130 mm
- Same filtration class as original F7 / ePM1‑55%
- Reliable fit and comparable filtration performance
Order the high‑quality alternative set here:
FLEXIT SPIRIT UNI 2 / UNI 2 AC Alternative Filter Set
2. Original FLEXIT F7 Set – Art. 111738
- Content: 2× F7 / ePM1‑55% EcoPleat ECO filters
- Filter type: EcoPleat ECO, 333 × 113 × 130 mm (art. 1023457)
- Use: supply and exhaust air filtration with high efficiency
- Ideal if you prefer to use OEM parts from FLEXIT
Order the original FLEXIT set here:
FLEXIT SPIRIT UNI 2 / UNI 2 AC Original Filter Set
3. Carbon Filter Set – Odour and VOC Reduction
- Content:
- 1× carbon filter for supply air (outdoor air)
- 1× regular filter for exhaust air (extract air)
- Dimensions (both filters): 333 × 113 × 130 mm
- Carbon filter on supply air side reduces odours and VOCs
- Regular exhaust filter protects the unit and exhaust ductwork
Recommended in urban locations, near busy roads or anywhere odour reduction is important.
Order the carbon filter set here:
FLEXIT SPIRIT UNI 2 / UNI 2 AC Carbon Filter Set
Recommended Solution for Most Users
-
Standard residential use:
High‑quality alternative F7 / ePM1‑55% set (2× filters) – same protection level as original filters and very good balance between air quality, energy efficiency and price. -
Areas with odour issues (traffic, industry, restaurants, smoke):
Carbon filter set (1× carbon supply + 1× regular exhaust filter).
Technical Data – Original FLEXIT Filter
- Filter type: F7 / ePM1‑55% EcoPleat ECO
- Article number: 1023457
- Filtration efficiency: ePM1‑55% (ISO 16890)
- EN class: F7 (EN 779:2012)
- Dimensions: 333 × 113 × 130 mm
- Use: supply and/or exhaust air filter (depending on unit setup)
- Compatibility: FLEXIT SPIRIT UNI 2, FLEXIT SPIRIT UNI 2 AC
- Original set: 2 pcs in set art. 111738
Filter Installation
- Switch off the unit and follow the FLEXIT user manual.
- Remove old filters and insert new ones in the same position.
- Observe airflow arrows (if printed) – they must point in the airflow direction inside the unit.
- Ensure the filters sit firmly without gaps around the edges.
- Close and lock the door properly for a good seal.
See video tutorial on how to change filters in FLEXIT units:
Watch: How to change filters (YouTube)
Replacement Interval
- Typically 1–2 times per year in normal residential use.
- Replace more often if:
- you live in a polluted or high‑traffic area,
- there is construction work nearby,
- there is a lot of dust or pets indoors.
- Replace earlier if filters look dirty or the unit shows a filter alarm.
FAQ – FLEXIT SPIRIT UNI 2 / UNI 2 AC Filters
Which filters fit FLEXIT SPIRIT UNI 2 and UNI 2 AC?
- Original set: art. 111738 – 2× F7 / ePM1‑55% EcoPleat ECO (art. 1023457)
- High‑quality alternative set: 2× F7 / ePM1‑55% filters, 333 × 113 × 130 mm
- Carbon set: 1× carbon supply filter + 1× regular exhaust filter, same dimensions
Why choose the high‑quality alternative filter set?
- Same filtration class (F7 / ePM1‑55%) as the original.
- Correct dimensions and good fit in the FLEXIT filter slots.
- Attractive price level with very good performance.
- Ideal if you want to keep regular maintenance costs under control while maintaining air quality.
When should I use the carbon filter set?
- If you want to reduce outdoor odours (traffic, smoke, restaurants, industry).
- To improve perceived indoor air quality and reduce VOCs.
- Especially suitable for city apartments and houses near busy streets.
How do I make sure I order the right set?
- Check the unit’s nameplate – it must be FLEXIT SPIRIT UNI 2 or FLEXIT SPIRIT UNI 2 AC.
- Measure your existing filters (approx. 333 × 113 × 130 mm).
- Compare with the product description (original set art. 111738 / filter art. 1023457).
Using the wrong filter size or class may cause:
- air bypass (leakage around the filter),
- poorer indoor air quality,
- higher energy consumption and fan noise,
- faster soiling of the heat exchanger and ductwork.
Stock and Delivery
Original FLEXIT, high‑quality alternative and carbon filter sets for FLEXIT SPIRIT UNI 2 / UNI 2 AC are usually available from stock, ensuring fast dispatch and quick delivery within the EU.
