DOMEKT REGO 600 VE / REGO 600 VW filter sets
Model: DOMEKT REGO 600 VE, REGO 600 VW – F7 / ePM1 60%, M5 / ePM10 50%
Filter size: 475 × 235 × 46 mm
NB! Do not confuse with other DOMEKT / REGO models – the filter dimensions and sets are different and are not interchangeable.
PS! These filters do not fit DOMEKT R600V C6M – the sizes are different.
In this category you will find both original and high‑quality compatible filter sets for Komfovent DOMEKT REGO 600 VE / REGO 600 VW ventilation units. The filters are manufactured according to the manufacturer’s specifications and ensure:
- very good indoor air quality
- stable and quiet operation of the unit
- energy‑efficient performance
Compatible (non‑original) filters are produced in the same dimensions as the originals and fit precisely into the filter slots of the unit (475 × 235 × 46 mm).
Recommended filter combination: F7 + M5
For standard residential use, the manufacturer generally recommends the following filter combination:
- F7 / ePM1 60% – supply air filter (outdoor air)
- M5 / ePM10 50% – extract air filter
You can order this set here:
This combination offers a good balance between high filtration efficiency and a reasonable pressure drop.
Other available filter combinations
- F7 + M5 – recommended standard set
Compatible / standard F7 + M5 set:
https://filters24.eu/domekt-r600h-rego-600-ve-vw-filterset
Original F7 + M5 set:
https://filters24.eu/domekt-r600h-rego-600-ve-vw-original-filterset
- F7 + F7 – higher cleanliness level also on extract air side
F7 + F7 sets (original and compatible) available on request – please contact us by email.
- M5 + M5 – lower filtration level but longer service life
M5 + M5 sets (original and compatible) available on request – please contact us by email.
- Carbon filter sets – for reduction of odours and VOCs (volatile organic compounds)
Carbon filter sets (original and compatible) for DOMEKT REGO 600 VE / REGO 600 VW / R600H and compatible units:
available on request – please contact us by email.
Technical data of filters
F7 / ePM1 filter
- Filtration efficiency: ePM1 60% (ISO 16890)
- EN class: F7 (EN 779:2012)
- Dimensions: 475 × 235 × 46 mm
- Type: compact filter 475x235x46-C
- Use: supply air filter for outdoor air
M5 / ePM10 filter
- Filtration efficiency: ePM10 50% (ISO 16890)
- EN class: M5 (EN 779:2012)
- Dimensions: 475 × 235 × 46 mm
- Type: compact filter 475x235x46-C
- Use: extract air filter
Compatibility – which units do these filters fit?
These filter sets (475 × 235 × 46 mm, compact filter 475x235x46-C) are compatible with the following KOMFOVENT models:
- DOMEKT REGO 600 VE
- DOMEKT REGO 600 VW
- DOMEKT R600H C6
- DOMEKT R600H C6M
NB! These filters do not fit DOMEKT R600V C6M or other units with different filter dimensions. Always check the exact model name on the unit’s nameplate and the dimensions of the existing filters before ordering.
Filter installation
Before replacing the filters, it is recommended to read the unit’s user manual. During installation you must follow the direction of the airflow – the arrows printed on the filter must point towards the rotor (heat exchanger).
Make sure that the filter frame sits straight and seals well, without gaps around the edges where air can bypass the filter.
FAQ – DOMEKT REGO 600 VE / REGO 600 VW filters
Which filters fit the DOMEKT REGO 600 VE / REGO 600 VW units?
The following filters are compatible with the DOMEKT REGO 600 VE / REGO 600 VW units. The same filters also fit the other models listed above:
- F7 / ePM1 60% supply air filter
- M5 / ePM10 50% extract air filter
You can order:
What is the difference between F7 and M5 filters?
- F7 / ePM1 60% – fine filter that captures most fine particles, pollen and allergens. Recommended for the supply air.
- M5 / ePM10 50% – medium‑class filter that captures coarser dust and larger particles. Usually used as the extract air filter to protect the unit and heat exchanger.
How do I install the filters in my DOMEKT REGO 600 VE / REGO 600 VW unit?
When installing:
- follow the airflow direction indicated on the filter – the arrows must point towards the rotor (heat exchanger)
- make sure the filter frame sits straight and seals well, without gaps
How often should I replace the filters?
Recommended replacement interval:
- 1–2 times per year in residential applications
- more frequently if:
- you live in a high‑traffic or polluted area
- there are construction works nearby
- your home has a lot of dust or pets
Filters should also be replaced earlier if they are visibly dirty or if the unit shows a maintenance / filter alarm.
Can these filters be used in other Komfovent models?
Filters are designed for specific models and dimensions. These sets fit:
- DOMEKT REGO 600 VE
- DOMEKT REGO 600 VW
- DOMEKT R600H C6
- DOMEKT R600H C6M
They must not be used in DOMEKT R600V C6M or in units with different filter dimensions. Always check the exact model name and existing filter size before ordering.
What is the difference between original and compatible filters?
- Original filters – approved by Komfovent and fully match the manufacturer’s specifications.
- Compatible filters – manufactured in the same dimensions and filter classes, fit into the same filter slots and provide a comparable filtration level.
Compatible filters are often a more cost‑effective solution while still maintaining the required filtration class and correct fit. F7 + F7, M5 + M5 and carbon filter sets (original and compatible) are available on request – please contact us by email.