DOMEKT R700F C6M
DOMEKT R700F C6M filter sets
Model: DOMEKT R700F C6M (controllers C6.1 and C6.2) – F7 / ePM1 60%, M5 / ePM10 50%
Filter size: 368 × 375 × 46 mm
NOTE! Do not mix with other DOMEKT models – filter dimensions and sets differ and are not interchangeable.
Note! These filters do not fit models DOMEKT R700F (standard C6.1 and C6.2 versions), DOMEKT R700V or CF700 – dimensions are different.
In this category you will find both original and high‑quality compatible filter sets for Komfovent DOMEKT R700F C6M ventilation units. The filters are manufactured according to the manufacturer’s requirements and ensure:
- very good indoor air quality
- stable and quiet operation of the unit
- energy‑efficient performance
Compatible (non‑original) filters are produced with the same dimensions as the originals and fit precisely into the unit’s filter slots (368 × 375 × 46 mm).
Recommended filter combination: F7 + M5
For typical residential use, the manufacturer usually recommends the following combination:
- F7 / ePM1 60% – supply air filter (outdoor air)
- M5 / ePM10 50% – extract air filter
This combination provides a good balance between high filtration efficiency and reasonable pressure drop and is the standard recommended set.
Other available filter combinations
- F7 + M5 – recommended standard set
Standard set for most residential applications: fine filtration on the supply side and medium‑class protection on the extract side. - F7 + F7 – higher cleanliness also on the extract air side
For applications requiring very clean air for both supply and extract (e.g. allergy‑sensitive users or cleaner environments). Available on request – contact us by e‑mail. - M5 + M5 – lower filtration class, longer service life
For applications where the highest filtration class is not necessary and longer filter life is desired. Available on request – contact us by e‑mail. - Carbon filter sets – reduction of odours and volatile organic compounds (VOC)
Additional filtration to reduce odours and VOCs in the supply air. Carbon filter sets are available on request – contact us by e‑mail.
Technical data of filters
F7 / ePM1 filter
- Filtration efficiency: ePM1 60% (ISO 16890)
- EN class: F7 (EN 779:2012)
- Dimensions: 368 × 375 × 46 mm
- Type: compact filter 368x375x46-C
- Use: supply air filter for outdoor air
M5 / ePM10 filter
- Filtration efficiency: ePM10 50% (ISO 16890)
- EN class: M5 (EN 779:2012)
- Dimensions: 368 × 375 × 46 mm
- Type: compact filter 368x375x46-C
- Use: extract air filter
Compatibility – which units do these filters fit?
These filter sets (368 × 375 × 46 mm, compact filter 368x375x46-C) are designed for the following KOMFOVENT model:
- DOMEKT R700F C6M (controllers C6.1 and C6.2)
Note! These filters do not fit standard DOMEKT R700F (non‑C6M), DOMEKT R700V, CF700 or other units with different filter dimensions. Always check the exact model designation on the unit’s nameplate and the dimensions of the existing filters before ordering.
Filter installation
Before replacing the filters, it is advisable to read the unit’s user manual. During installation, follow the airflow direction – the arrows printed on the filter must point towards the heat exchanger.
Make sure the filter frame sits straight and seals well, without gaps at the edges where air could bypass the filter.
FAQ – DOMEKT R700F C6M filters
Which filters are compatible with DOMEKT R700F C6M?
The following filters are compatible with DOMEKT R700F C6M units:
- F7 / ePM1 60% supply air filter
- M5 / ePM10 50% extract air filter
Which filter set is recommended?
For most residential applications, the recommended standard set is:
- F7 + M5 (F7 on supply air, M5 on extract air)
Can I order F7 + F7, M5 + M5 or carbon filters?
Yes, in addition to the standard F7 + M5 set, it is possible to order:
- F7 + F7 sets – for higher cleanliness on both supply and extract air
- M5 + M5 sets – for lower filtration level but longer filter life
- Carbon filter sets – for reduction of odours and VOCs in the supply air
All these special options are available on request – please contact us by e‑mail.
How often should I replace the filters?
Recommended replacement interval:
- 1–2 times per year in residential use
- more frequently if:
- you live in a high‑traffic or polluted area
- there is construction work nearby
- your home has a lot of dust or pets
